How to check your PC's temperature

Hello Friends,

This Trick is something different that is you can check your Computers temperature very easily using a application called as Real Temp. Real Temp is a temperature monitoring program specially designed for all Intel single Core, dual Core,quad Core processors and latest processors and even for processors other than Intel. Each of the core on your processors has a digital thermal sensor or DTS which will report the temperature data relative to TjMax which is the safe maximum operating core temperature for the CPU or The Warning Level. When you continously use your PC your CPU gets heated and your Distance to TjMax will decrease. So when it reaches zero(0) the processor will start to throttle or slow down so obviously maximizing your distance away from TjMax.

So Real Temp helps you in monitoring your pc temperature and also Warns you if the processor gets heated up thus preventing from and damage that will happen.

Download Real Temp for free.

Also Read:

How to Fix USB Device Not Recognized in Windows

Hi Everyone,
In this Post am going to explain how to get rid of the usb device not recognised error.
Most of you will be getting this error whenever you try to plugin a Pendrive,USB mouse,External devices,USB keyboard.
Even i Faced the same problem 3 days back and got it rectified so i wanted to convert my problem and the solution that i got it to a Article which i have presented here!!!!!
I thought that there is a problem with the port so check it out i connected my mobile but the mobile was charging and there was no problem with the port.

So i reinstalled all my drivers i thought it would fix my problem but it didnt. I was frustrated.
I Searched many articles online and found a solution to this frustrating error.

When you get these kind of error just go to Device Manager and you can see that the device is shown as an Unknown Device as i have shown below.

You may laugh at this solution :D :D because there is no involvement of drivers,installation etc.
The simple awsome solution is Just UNPLUG YOUR COMPUTER/PC FROM THE POWER SUPPLY.

Note: This doesnt mean just turning off your PC because modern PC's doesnt really turn off when you press the power button because the still motherboard gets power to it.

Didnt Understand still???

Motherboard is the place where all the hardware of the Pc is connected to it even the USB ports.Most of the times the motherboard should be rebooted because all your USB ports suddenly stops working.

The microprocessor located on the motherboard will reload the drivers.

So this will bring your usb ports to normal condition.

All you need to do is:

Just turn off your PC with the Shut Down option or just by pressing the power button
UNPLUG the connection from the wall outlet.
After 2-3 mins just plug it back.

I got it fixed like this!!!Hope this works for you too!!!!!!!!!!

Also Read:

HOW TO FORMAT A WRITE PROTECT USB DRIVE OR MEMORY CARD

Hello,
The most Famous and frustrating problem which users face is write protection of USB due to which we cannot Format Usb Drive.
Before Going on to discussion please read the Below two Steps:
1. Make sure that the write-protection latch of your drive is turned off (Optional in some drives)
2. If you are using any updated/New antivirus,Please try scanning the affected drive for viruses.

Ok if the above didnt solve your problem Please follow any of following 3 methods

Solution #1: Fixing Registry

Press Windows key + R . Type regedit and Enter..
Go to folders in the below given order

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies

Now in the right pane just double click on the key WriteProtect. Finally just set the Value Data to 0 and press the Ok button.
Exit the Registry and restart your system.

Solution #2: Formatting Utility

All you need to do is just Download Apacer Formatting Utility.
Extract the downloaded Rar File and double-click the Start.bat file . This will start formatting your Drive. Wait until the formatting process completes.
Remove your drive and plug it once again to the system.

Solution #3: Low-level format

Now Just download the utility HDD Low Level Format Tool.
Perform a low-level format of your USB drive.
Press winkey + R and type diskmgmt.msc press Enter.
Right click the USB Drive and press Format.

Also Read:How to Convert/download Youtube Videos For Free

How to Format USB Drives to delete Viruses Permanently

Hello Everyone,

You will be frustrated of viruses which almost corrupts your files. But you people will be using antivirus to scan the most harmful viruses and remove them.
But you know what????
When you transfer data through USB/PenDrives it may contain viruses and you will be able to format the USB drive but some of the viruses do remain in drive even though you format it.
So here I will give you a solution which removes virus permanently from your pen drive.

Also Read:Top 5 Softwares To Recover Corrupted/Damaged Files

Steps To Be Followed:

Plugin the Pendrive which needs to be formatted

Now Just Find the drive letter of the inserted pen drive

Click on Start Button and Then click on Run

In the Run Prompt Type cmd and then Hit Enter
You can see a command Prompt Appeared and In this window Type just as shown below

format "Pen drive Letter:"
ex: if your pendrive letter is K then type Format k:

Hit the Enter button twice and now the cmd prompt will verify the pendrive file system
And Now the command prompt will ask to enter drive name(Pendrive name) just type your own name and HIT enter

Now Your Pendrive Is Completely Formatted :)

Fix Window Xp Activation Loop [With 3 Simple Methods]

Do you encounter a windows XP activation loop? Where it continually ask you to activate windows, but the activation wizard will tells you that it is already activated or you face the problem of loggin on and when you click yes it returns back to the logon screen.

I have Three methods to solve this Problem:

Method 1:

If you Face the above problem show in image or if you receive the activation
loop as show here, you can bypass with the following steps.

First reboot into safe-mode with command prompt(by tapping F8 repeatedly

when u boot the system).

type "explorer.exe" in dos window and click enter

close dos window and click on start.

Type in exactly: rundll32.exe syssetup,SetupOobeBnk (and click OK)

(note: one space, after "rundll32.exe " also the Oo are two letter o's in "oobe"; capitals and comma are important)

Wait a couple of seconds (although you will Not see any change)

Restart your PC normally (Start - Shutdown - Restart - Ok)

You are now able to go to Normal Mode again (For another 30 days !!!)

Method 2:

What you need: Untouched Windows XP Disc Installer or Original/Backup copy of windows XP Disc

I always encounter this problem everytime I repair-install a Windows XP system. So here is what I did to fix the problem. First restart your PC then

1.) Log onto Windows using SAFEMODE with command prompt.
2.) Wait until the windows boot then Type "explorer" in the command prompt.
3.) Explore Windows XP CD and copy the TOOLS folder (located at support folder) to C:\
4.) In the TOOLS folder extract the DEPLOY.cab (this will create a new folder called deploy).
5.) Open the DEPLOY folder and run SYSPREP.
6.) Click FACTORY button. Notice that your PC will shut down.
7.) Power on your PC and wait till the windows desktop screen appear.
8.) Once finish Click RESEAL button and wait. Notice that your PC will shut down again.
9.) Power on again your PC and your done.

Method 3: (Try this method at your own risk )

Insert the Windows XP startup disk into the floppy disk drive, or insert the

Windows XP CD-ROM into the CD-ROM drive, and then restart the computer.

Click to select any options that are required to start the computer from the

CD-ROM drive if you are prompted to do so.

When the "Welcome to Setup" screen appears, press R to start the Recovery Console.
If you have a dual-boot or multiple-boot computer, select the installation that

you want to access from the Recovery Console.

When you are prompted to do so, type the Administrator password.
If the administrator password is blank, just press ENTER.
At the Recovery Console command prompt, type the following lines,

pressing ENTER after you type each line:

md tmp

copy c:\windows\system32\config\system c:\windows\tmp\system.bak

copy c:\windows\system32\config\software c:\windows\tmp\software.bak

copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak

copy c:\windows\system32\config\security c:\windows\tmp\security.bak

copy c:\windows\system32\config\default c:\windows\tmp\default.bak

delete c:\windows\system32\config\system

delete c:\windows\system32\config\software

delete c:\windows\system32\config\sam

delete c:\windows\system32\config\security

delete c:\windows\system32\config\default

copy c:\windows\repair\system c:\windows\system32\config\system

copy c:\windows\repair\software c:\windows\system32\config\software

copy c:\windows\repair\sam c:\windows\system32\config\sam

copy c:\windows\repair\security c:\windows\system32\config\security

copy c:\windows\repair\default c:\windows\system32\config\default

Type exit to quit Recovery Console. Your computer will restart.

Note: This procedure assumes that Windows XP is installed to the C:\Windows folder.
Make sure to change C:\Windows to the appropriate windows_folder if it is a different location.

If you have access to another computer, to save time, you can copy the text in step five, and then
create a text file called "Regcopy1.txt" (for example). To use this file, run the following command
when you start in Recovery Console:

batch regcopy1.txt

With the batch command in Recovery Console, you can process all the commands in a text file sequentially.

When you use thebatch command, you do not have to manually type as many commands.

How To Disable Detection Of USB

Hello friends,here is a preity cool and easy trick to disable the detection of usb in any computer.

First of all back up your registry.

Now open run command prompt.

In the box type"regedit"and hit the enter.

Now go to HKEY_LOCAL_MACHINE\system\CurrentControlSet\Services\UsbStor

Here in the right side, set the value of Start to 4.

Now restart PC.

How To Fix Overheating Problem Of Laptop

Friends,many of people using laptop may facet this problem-overheating,and they will think about if the laptop has some problem or some accessories has broken,then they will worry about it.In fact,there is no need to worry about it and it's a normal phenomena to use laptop for long time.But sometimes it's good that we should know some knowledge about laptop overheating.
There are two kinds of overheating.
1. Component specific overheating, caused by CPU or Graphics Processing figure GPU.
2. Overall temperature inside the laptop, caused by HDD and Battery.
99.9% cases its CPU, GPU or North Bridge (if no GPU present). But in these 99.9% cases sometimes its not just gets fixed by cleaning the dust from heat-sink vents.
I am assuming you failed to fix overheating problem by following-
Removing breach from laptop glow sink.
Colorful fan settings in CMOS.
Update the bios ensconce new version.
Replaced the cpu cooling nut again graphics processing unit cooling fan
Tried a costly branded thermal past or clement pad.
Overheating happens because of dust, fan failure, loose heat-sink or broken heat-sink. Laptop gets overheat even if you don't run touch-and-go CPU intensive software or graphics on the laptop besides all larger listed things seems okay. But Laptop carry through heavyweight heat even you running on lightweight programs like notepad or stunt on CMOS apartment screen. This problem is ditching all the laptops those raise tuck away the graphics share. When the BGA graphics chip see through little dry-solder or comes to the end of the life. Overheating is the most common chew over when you take up your laptop response for a while and then freeze up, shut down on its concede or even restarts while still plugged in charging. It gross caused by CPU overheating.
If CPU overheats thus pre-eminent of all try to modify it with same stir CPU. If straight problem exists after replacing the CPU then change the CPU core voltage VRM section's SMD electrolytic capacitor or PTH (non SMD) electrolytic capacitor placed near the CPU socket. In the event of GPU overheats perceptible usually hangs or restarts. IF you having not easy hush up graphics Processor you seemly wait for when your laptop GPU goes down. Then it will serve as the right point to re-ball or reflow the GPU piece. Or you can rest the energy of your GPU chip just succeeding these instructions. Heat is a killer for electronic devices and DC power socket repair cooling follower play a most important role to save the life of laptop. Manufacturer profit a smart stone circuit for their cooling fan also fan speed is also controllable. Inasmuch as a well designed laptop leave run the fan rightful fast enough to keep the temperature spell the ideal operating range. But as laptop ripe older it's effects the nut performance also.
In over easy way we can stay on through the smart kernel standard circuit desired disconnect the PWM controller pin from stone header it's terribly no trouble way to prevent our laptop from overheat. After the dawning connection of PWM signal nut runs on the same speed it's never gets down prominence the individual mode but palpable entrust be stick to off if smart fan circuit will axe fan. We just bypass the fan speed control some situation laptop gets overheat alongside Laptop Motherboard Repair Service BGA chip, Re-ball the GPU or North-bridge due to faulty chip or if sensible not placed purely on motherboard then further we have to bypass the cooling fan since good ventilation.
I hope this post will be helpful to you.